|
Redfir Panel is the First and Only certificated Factory by PSB in China.
|
|
Nano (PVDF) panel
|
|
Nanometer panel inherit all features of traditional PVDF panel, like antipollution, cauterization resistance, fastness and so on, Meanwhile, we apply nanometer high technology, which has superior function of self-cleaning , anti-pollution, acid-resistance and alkali-resistance. It is an updated decorative material.
It have better self-cleaning function comparing with traditional PVDF panel. Usually when aluminum composite panel is used for exterior wall for half year, the surface is polluted badly by the dust and rainwater. Especially some projects use inferior silicone sealant. When it is dipped in rainwater for long time, there will be some black marks between the seams. And it is very difficult to be cleaned. So it will badly affect the appearance of the wall. Now the Nano panel solve this problem. Because of the its low coating tension, the dust is difficult to adhibit on the surface of the panel. It can be easily rushed away by little rain to come true its self-cleaning effect. As the result, it could save you a lot of cleaning charge.
And you could write on the surface of panel with ink pen to distinguish Nano panel..If the mark could be rubbed away easily, it is proved Nano panel.
|
|
Raw Material
|
|
Basis aluminum: high-strength aluminum alloy
Plastic core: no-toxic low density polyethylene
Surface coating: PVDF , Nanometer paint.
|
|
Nanometer aluminum composite panel structure
|
|
Nano principle: We coat the self-cleaning protection layer on the surface of the PVDF painting It could insulate the dust and decompose the organic contamination to come true self-cleaning effect.
|
| |
 |
|
Nanometer Paint
|
|
PVDF Paint
Primer Paint
|
|
Aluminum Panel
|
|
 |
| Specification |
thickness: 3-6mm,
recommend: 3mm,4mm.
Width: 1000-1575mm,
recommend: 1220mm, 1250mm, 1500mm.
Length: maximum 5800mm,
recommend:2440mm, 3050mm, 4050mm. |
| Testing item |
Standard |
Result |
| Unit weight |
ASTM D792
|
T4mm=5.5kg/m2 |
| Thermal expansion |
ASTM D696
|
24-28 |
| Thermal deformation temperature |
ASTM D648 |
115℃ |
| Thermal conduction |
ASTM 976
|
0.102kcal/m.hr℃ |
| Flexural rigidity |
ASTM C393
|
14.0*10∧5 |
| Impact resistance |
ASTM D732 |
1.640 kgf |
| Adhesive strength |
ASTM D903 |
0.77kg/mm |
| Flexural Elasticity |
ASTM D790
|
4032kg/mm2 |
| Shear resistance |
ASTM D732
|
2.7kgf/mm2 |
| Fire propagation |
ASTM E84
|
QualiIfied |
| Wind-pressure resistance |
ASTM E330
|
Pass |
| Properties against water |
ASTM E331 |
Pass |
|
Arameter of Nanometer Coating(PSB tests according theAAMA2605-05standard)
|
|
ltem
|
IBOND Result
|
AAMA2605-05Requirement
|
| Dry film scratch hardness |
F |
Minimum F (No rupture of film) |
| Adhesion of dry film |
No removal of film |
No removal of film |
| Adhesion of wet film |
No blistering
No removal of film |
No blistering
No removal of film |
Adhesion of boiling water
|
No blistering |
No blistering |
| Impact resistance |
No removal of film
No removal of film from substrate |
No removal of film
No removal of film from substrate |
| Abrasion coefficient (litres/mil) |
40 |
40 minimum |
| Muriatic acid resistance10% (v/v)HCL |
No blistering
No visual change |
No blistering
No visual change |
Mortar resistance
|
Mortar dislodged easily
No residue
No loss of film adhesion
No visual change |
Mortar shall dislodge easily
any residue shall be removable with damp cloth
any lime residue should be easily removed with
10% muriatic acid solution
No loss of film adhesion
No visual change |
Nitric acid￡(70% w/w) resistance,
colour change △E(Hunter)
|
1.3 |
Not more than 5△E units (Hunter) |
Detergent resistance
|
No loss of film adhesion
No blistering
No significant visual change |
No loss of film adhesion
No blistering
No significant visual change |
Window cleaner resistance
|
No remove of film under tape
No blistering
No visual change |
No remove of film under tape
No blistering
No visual change |
|
Features
|
|
Economic:
|
We adopt high-quality of paint. So the dust is difficult to adhibit on the surface of the panel. It can be easily rushed away by little rain to come true its self-cleaning effect. As the result, it could save you a lot of cleaning charge
|
|
Environment protection:
|
Superior aging resistance, no coating change, no pollution, anti-acid, anti-alkali, solvent-resistance.
|
|
Durable:
|
It is more durable, weather-resistance, temperature-resistance, friction-resistance, pollution-resistance, aging-resistance comparing with traditional PVDF panel.
|
|
Recyclable:
|
we could separate aluminum and polyethylene to recycle to reduce the environment pollution.
|
| Advantage of NANO ACP |
| Item |
NANO PVDF coating |
PVDF coating |
| Fineness of structure |
Particle size of NANO resin material is between 0.03μ－0.01μ, smooth and flat. |
Particle size of the surface is more than 0.01μ, smooth surface. |
| Pollute resistance |
Due to good flatness and smoothness of the surface, the dust is difficult to adhibit on the surface of the panel and easy to be cleaned. |
Dust particles are similar with the coating particles, so they can adhibit together easily. |
| Self-clean properties |
Small pellets, big tension, dirty can be easily cleaned by wind and water . |
Small surface tension, the adhesion of dirty and grease is bigger,it is difficult to clean away the dirty by mobile water. |
| Scrub resistance |
No change, when>=10000times. |
Many thousand times. |
| Weathering resistance |
Adopted international advanced technology for 3 coatings, which have the effect of anti-weather and color protection, NANO painting can be formed protection layer on the surface of the coating have advantage of anti-oxidation and anti-weathering 20 years of warranty. |
Adopted traditional 2 coatings technology , warranty 15 years. |
Thickness: 3-6mm,
Recommend: 3mm,4mm.
Width: 1000-1575mm,
Recommend: 1220mm, 1250mm, 1500mm.
Length: maximum 5800mm,
Recommend:2440mm, 3050mm, 4050mm.
|
